Finally ported TWRP to the Medion Lifetab P10505 with working touch.
No guarantees are given, if you damage your tablet, all you do is on your own risk. I have the original ROM from Medion, if you need a full restore.
Please note that the TWRP recovery was not much tested and may be buggy. I didn't test with encryption or the restore process.
Please follow these steps:
1. Download all the files from Mega:
https://mega.nz/#F!pvQCQCxL!dfCHhGkliNSj-Wd3NcRV2ghttp://
2. Unpack all files into the same directory
3. If not done already, install the Intel Driver Package and reboot your PC
4. Unpack the ADB Tools into the directory
5. On your tablet go to your settings and enable USB debugging in the developer options. If you don't see the developer options menu under settings, goto about tablet and tip the build number seven times fast which will reveal the Developer options in the Settings.
6. Copy the file UPDATE-SuperSU.zip to your tablet (via USB or to memory card)
7. Switch off your tablet
8. Press and keep pressed the On/Off button and Volume Down button until you see the bootloader menu. Please press the buttons at the same time.
9. Now connect the table via USB cable to the PC.
10. Open a command window on your PC and change to the above created directory .
11. type the command: fastboot oem unlock (you can lock it again after the whole process if you want)
If this doesn't work goto the below section: Install recovery through flash
12. next type: fastboot flash recovery final_P10505_working_TWRP_3.0.2.0.img
13. Use the volume up or down button until Recovery mode is displayed.
14. Press the On/Off button shortly to start the new TWRP recovery menu. Please be patient until it fully loads. May take a couple of minutes.
15. Now choose install from the menu.
16. Proceed to the folder where you store the UPDATE-SuperSU.zip and select the file and swipe to install.
Note: If you forgot to copy the file to the tablet you can use the windows explorer to copy it to your tablet. There is a new device called Vi10 plus
(as mentioned it is only a port not build from source)
17. The Zip file should install
18. Use the back button to go back to the main menu of the recovery and select reboot and then system.
19. Now you have rooted the device and can create backups in the TWRP recovery.
20. To verify use any root checker tool from play store.
21. Feel free to hit the Thanks button
Install recovery through flash:
If there are any errors you can download the original ROM from Medion.de. You need then the Intel Platform Flash Tool Lite to install the ROM from Scratch (all your data will be lost).
When you run the flash tool, open the file from Medion.de and it will unpack the zip-file in the folder C:\Users\Your account name\.flasher\.download\p1050x-6.0-factory-v2.3
Proceed to the folder Just rename the file final_P10505_working_TWRP_3.0.2.0.img to recovery.img and replace the original file from Medion. Then hit the flash button.
Actually the Intel tool will perform the same command as above.
PS: I read that P10506 is hardware like the same as P10505, so it may work there as well, but no guarantees.
PPS: Credit go to the creators of the TWRP file for the Chuwi Vi10 plus (Highbook), which I don't know their names.
No guarantees are given, if you damage your tablet, all you do is on your own risk. I have the original ROM from Medion, if you need a full restore.
Please note that the TWRP recovery was not much tested and may be buggy. I didn't test with encryption or the restore process.
Please follow these steps:
1. Download all the files from Mega:
https://mega.nz/#F!pvQCQCxL!dfCHhGkliNSj-Wd3NcRV2ghttp://
2. Unpack all files into the same directory
3. If not done already, install the Intel Driver Package and reboot your PC
4. Unpack the ADB Tools into the directory
5. On your tablet go to your settings and enable USB debugging in the developer options. If you don't see the developer options menu under settings, goto about tablet and tip the build number seven times fast which will reveal the Developer options in the Settings.
6. Copy the file UPDATE-SuperSU.zip to your tablet (via USB or to memory card)
7. Switch off your tablet
8. Press and keep pressed the On/Off button and Volume Down button until you see the bootloader menu. Please press the buttons at the same time.
9. Now connect the table via USB cable to the PC.
10. Open a command window on your PC and change to the above created directory .
11. type the command: fastboot oem unlock (you can lock it again after the whole process if you want)
If this doesn't work goto the below section: Install recovery through flash
12. next type: fastboot flash recovery final_P10505_working_TWRP_3.0.2.0.img
13. Use the volume up or down button until Recovery mode is displayed.
14. Press the On/Off button shortly to start the new TWRP recovery menu. Please be patient until it fully loads. May take a couple of minutes.
15. Now choose install from the menu.
16. Proceed to the folder where you store the UPDATE-SuperSU.zip and select the file and swipe to install.
Note: If you forgot to copy the file to the tablet you can use the windows explorer to copy it to your tablet. There is a new device called Vi10 plus
(as mentioned it is only a port not build from source)
17. The Zip file should install
18. Use the back button to go back to the main menu of the recovery and select reboot and then system.
19. Now you have rooted the device and can create backups in the TWRP recovery.
20. To verify use any root checker tool from play store.
21. Feel free to hit the Thanks button
Install recovery through flash:
If there are any errors you can download the original ROM from Medion.de. You need then the Intel Platform Flash Tool Lite to install the ROM from Scratch (all your data will be lost).
When you run the flash tool, open the file from Medion.de and it will unpack the zip-file in the folder C:\Users\Your account name\.flasher\.download\p1050x-6.0-factory-v2.3
Proceed to the folder Just rename the file final_P10505_working_TWRP_3.0.2.0.img to recovery.img and replace the original file from Medion. Then hit the flash button.
Actually the Intel tool will perform the same command as above.
PS: I read that P10506 is hardware like the same as P10505, so it may work there as well, but no guarantees.
PPS: Credit go to the creators of the TWRP file for the Chuwi Vi10 plus (Highbook), which I don't know their names.
Last edited:
